| VER-01 |
REQ-SAFE-03 |
Run KiCad DRC with Mains_HV 5.0 mm rule enabled. |
0 clearance or creepage violations |
Pending |
| VER-02 |
REQ-SAFE-01 |
Power board via current-limited isolation transformer; measure 5V and 3.3V rails. |
5.0V ± 5% and 3.3V ± 2% with < 50 mV ripple |
Pending |
| VER-03 |
REQ-FUNC-01 |
Boot board with J_MODE closed vs. open; check serial boot log. |
Correctly selects STAIR and DESK profiles |
Pending |
| VER-04 |
REQ-FUNC-02 |
Connect 30-pixel WS2812B strip and trigger PIR_IN. |
Smooth warm-white fade-in without flicker |
Pending |